Careers

1 Should be well-versed in AutoCAD Plant 3D P&IDs as well as intelligent P&IDs in accordance with process guidelines.

2 Able to create Piping material specification in AutoCAD Plant 3D as per P&IDs

3 Should posses sound knowledge on equipment layout, piping layout, piping GAD and orthogenrations.

4 Should be able to create or edit isometrics templates / border / scale / report format / drafting standards.

5 Should be able to create Equipment models in AutoCAD Plant 3D as per Vendor Drawing.

6 Able to create Tie-in List / Tie in sketch

7 Able to do the piping routing in AutoCAD Plant 3D independently.

8 Should be able to generate the stress isos, coordinate with pipe stress department and revise the 3D model as required.

9 Possess thorough knowledge on pipe support standards for critical and non critical lines.

10 Able to perform Initial clash check and 3D model review as per detail phase requirements

11 Should be able to lead the 30%, 60% and 90% model reivew with customer.

12 Should be able extract isometrics and review them as per the checklists following company’s standard review process.

13 Should be able to extract MTO report from Plant 3D and review.

1 AutoCAD Plant 3D

2 AutoCAD

3 Navisworks

4 CADWorx

1 Strong communication skills

2 Plant layout, Equipment layout

3 Isometrics extraction

4 Spec edit

5 Problem solving

Permanent job, Full time

Oil & Gas

Kochi

1 Coordinate engineering for steam and power generation projects

2 Equipment sizing and selection

3 Maintain pipeline lists, valve lists, and piping specialty items lists.

4 Develop heat and material balances

5 Specific experience working for an EPC firm involved in steam and power generation projects

6 Experience writing equipment specifications for some of the following: pumps, material handling systems, ash handling systems, boilers, heat exchangers, air pollution control equipment, water treatment, compressed air systems, turbine generators and piping systems

7 Experience with package or power boilers, power boiler fuel-conversions, steam turbines, heat recovery steam generators, combined heat and power (CHP), and pellet mills

8 Mentor Junior Mechanical Engineers

9 Travel to the field as needed throughout the duration of the project to review the

10 Ensure processes meet regulatory standards and company quality requirements.

11 Work with cross-functional teams

12 Non-metallic piping stress analysis will added advantage.

13 Create process flow diagrams, P&IDs (Piping and Instrumentation Diagrams), and layouts.

1 Aspen HYSYS

2 MS Project

3 AutoCAD

4 Navisworks

5 Bluebeam

1 Strong communication skills.

2 Ability to use tools like Aspen HYSYS, AutoCAD, for process modeling.

3 Familiarity with pumps, heat exchangers, reactors, and other industrial equipment.

4 Data sheet preparation

Permanent job, Full time

Oil & Gas

Kochi

1 Piping stress analysis using Caesar & Auto pipe software.

2 Having good exposure on piping codes and standards.

3 Capable to perform complex piping stress analysis independently and provide the complete package for review & submission.

4 Piping stress analysis includes various equipment like pumps, heat exchangers (plate air cooled, shell & tube), column, reboiler, furnace, compressor, turbine etc connecting to piping system.

5 Underground piping modeling and analysis.

6 Possess thorough knowledge on pipe support standards for critical and non-critical lines.

7 Caesar Load case building by considering all the operation scenario and Occasional loads based on the requirements.

8 Should be able to generate the stress isos, coordinate with pipe design department and provide the necessary modification markup to the piping design.

9 Piping stress analysis report generation.

10 Participate in the client meeting.

11 Data sheet preparation for spring hanger, snubber, expansion joints, strut etc

12 Non-metallic piping stress analysis will added advantage.

1 Caesar

2 Auto pipe

3 AutoCAD

4 Navisworks

5 Bluebeam

6 Nozzle Pro

1 Strong communication skills

2 Solve the complex piping stress problem Independently

3 Knowledge of Codes & Standard

4 Data sheet preparation for spring hanger, snubber, expansion joints, strut etc

Permanent job, Full time

Oil & Gas

Kochi

1 Develop project plans, timelines, and budgets in collaboration with cross-functional teams

2 Responsible for the successful delivery of projects along with quality standards.

3 Project Monitoring and control with the teams, while reporting/ managing any deviations (Time, Dates, Resources and quality of delivery).

4 Review and approve scope, budget, and schedule for assignments and ensure quality deliverables on time and within targeted cost.

5 Reviews the Proposal Handover Documentation, Participates and Ensures proposal handover is completed and takes ownership of the contract execution (Project).

6 Organise project setup activities and organise project team, communicate the project objectives, scope, milestones, contract terms and conditions, provide direction, leadership, control, monitor of project activities till completion and handover.

7 Implement and maintain coordinated internal reporting procedure and conduct routine weekly meetings with all supervised staff to monitor the company’s performance, reporting to the management.

8 Identify critical path execution issues and prepare a look ahead schedule through Project control.

9 Project closure and handover to customer and updating the financial forecasting report.

10 Management skills to control the flow of a job like assigning tasks, scheduling deliveries, and coordinating with clients.

11 Manage the weekly reporting process, chasing engineering team as required to ensure the timely submission of reports to management team and escalating late delivery

12 Identify, assess, and manage project risks, assumptions, issues, and dependencies, escalating as appropriate via the agreed governance framework.

13 Good Experience in MS Project and SharePoint (Office 365).

14 Techno commercial bids – power plants like boiler / turbine / auxiliary equipment’s

15 Vendor co-ordination and finalization.

16 Improve the effectiveness of work plans in collaboration with other functions.

17 Feasibility study to evaluate the technical and financial viability of the proposed power plant projects

18 Quick adaptabilities to changing technologies to meet new requirements successfully with a systematic and organized approach.

1 MS Project

2 Naviswork

3 Primvera

1 Planning and Organization.

2 Budgeting & Cost Management.

3 Conflict Resolution & Decision-Making.

4 Resource Allocation.

5 Assign tasks, set priorities, and monitor deadlines.

6 Strong communication skills.

Permanent job, Full time

Oil & Gas

Kochi

1. Experienced Structural engineer in Oil and gas refineries, Petrochemical plant and power

   plants.

2. Structural Steel design of pipe racks, pipe bridges, miscellaneous pipe supports, equipment

   supporting structures and access platforms, and its foundation design (Shallow & Pile)

3. Design foundations for vertical and horizontal vessels and Pit design and Structural skid

   design.

4. Candidate should be well versed with American codes (AISC, ACI, ASCE) and PIP standards.
5. Should have knowledge of connection design including anchor bolts and base plates design.

1. Strong Communication Skill
2. Problem-solving and Goal-oriented
3. Teamwork
4. Works well under pressure

1. RISA 3D & RISA Foundation
2. NAVIS WORK
3. RISA CONNECTION
4. STAAD PRO
5. MICROSOFT OFFICE
6. BLUEBEAM REVU

Permanent job, Full time

Oil & Gas (RCC, Steel Structure and Foundation)

Kochi

1 Resource should have good hands Generate 3D models and connection develop.

2 Resource should have Design, Fabrication, connection & detail drawings experience.

3 Candidate should have knowledge of US codes and standards (AISC and PIP)

4 Resource should have knowledge on Foundation modeling and detail drawings.

1 Tekla structure

2 AutoCAD

3 CADWorx

4 Advance Steel

1 Communication

2 Problem-solving and Goal-oriented

3 Teamwork

4 Works well under pressure

Permanent job, Full time

Oil & Gas

Kochi

1 Should be well-versed in Autodesk Inventor.

2 Experience in preparing Piping & instrumentation diagrams (P&ID), Process flow diagram (PFD), Block flow diagram (BFD), using AutoCAD 2D.

3 Ability to understand & incorporate Process Engineers inputs and communicate with them effectively.

4 Ability to compare PFD, PID with Vendor document is preferred.

5 Should be able to create Equipment models in Autodesk Inventor as per Vendor Drawing.

6 Ability to work on the skid structural modeling. Also, should be proficient in detailing structural components and accessories.

7 Able to do the piping routing in Autodesk Inventor independently.

8 Should be able to generate the piping isometrics/spool fabrication drawings and shop drawing.

9 Able to create detailed fabrication drawing and general arrangement drawings fro the pressure vessels in Autodesk Inventor.

10 Should be responsible to co-ordinate with the fabricator for any of the queries and provide feasible solutions.

11 Should be able to prepare piping line list, valve list, equipment list.

1 Strong communication skills

2 Knowledge on skid pacakges

3 Fabrication drawings

4 Pressure vessels

5 Piping

1 Autodesk Inventor

2 AutoCAD

3 Navisworks

4 Solidworks

Permanent job, Full time

Oil & Gas

Kochi

• SKM
• AutoCAD Electrical
• Plant 3d
• Bluebeam
• Navis Works
• ETAP

• Electrical System Design, SLD, Load Calculations, Transformer Sizing calculations etc.
• Preliminary Electrical system analysis like Load Flow Study, Short circuit study etc
• Specification, Review, Schedule and Documentation
• Review and Analysis of Earthing layout System
• Equipment and lighting layout review.
• Review of cable tray layout designs, BOQ, ensuring efficient routing of cables
• Loop Diagrams, Interconnecting diagrams review.
• Prepare cable schedules, detailing cable types, lengths, cable sizing and terminations.
• Develop conduit schedules to specify conduit sizes, types, and routing requirements.
• Design and prepare equipment layout drawings to ensure optimal placement and space utilization.

Permanent job, Full time

Kochi

Oil & Gas

CADWORX

Piping Design Engineering in Petrochemical, Refinery & Biogas, Oil & Gas Sector, WTP, Bio process plant projects with proficiency in 2D & 3D Modelling and Detail engineering.

Hands-on experience in tools like CADWorx used to create 3D Piping Modelling, Equipment Modelling, Piping GA, Iso extraction and Reviews.

Ability to understand piping codes and standards. Checking project scope of work for all engineering activities

Study of technical document and understanding the scope of work

Pipe planning as per FEED documents and Scope of work

Planning and Routing of pipe as per P&ID in 3D Modelling Environment

Knowledge of administrative work related to software such as CADWorx

Knowledge of Detail engineering activities such as Equipment & Piping layout, Piping isometrics and Material Take-off

Familiarity with international design codes and standard (ASME, API, ASTM, ANSI)

Knowledge of Primary & secondary supports and support detailed drawing

Study of PFD, P&ID, Plot plan, Instrument Hook-up drawings, civil drawings & various layout drawings

Familiar with interference checking of overall plant model in Navisworks

Attend the internal review activities and inter-discipline check meetings. Provides technical  support to Team

Prepare project estimate for the piping effort

Work jointly with Project Engineer and Engineering team

Permanent job, Full time

Oil & Energy, Mechanical or Industrial Engineering

Kochi