54% of the Industry believes BIM is the way forward in Building Engineering.
“BIM or Building Information Modelling is a process for creating and managing information on a construction project across the project lifecycle”. BIM has been around since
Linking Radiography test, Joint Efficiency and Weld Joint Category per ASME Sec VIII Div. 1
Let us start out by briefly explaining of these terms: Radiography test is a nondestructive testing method of inspecting some hidden cracks in the material
Adopting Building Information Modeling (BIM) For The US Market!
The value of building information modeling (BIM) in the architecture, engineering and construction (AEC) industry cannot be emphasized enough in today’s technology driven Internet connected
How BIM Enhances The MEP Design Process?
The words Building Information Modeling, commonly known as BIM in engineering is a modern technique of representing the functional and physical attributes of building structures
Non-Destructive Testing (NDT) for Accurate Prediction of Plant Reliability
Non-destructive testing methods provide data on Process Plant performance and the plant component quality by providing quality inputs from inspections performed during varying operating conditions.
Economic Advantages Of Cathodic Protection Against Corrosion
Corrosion is a leading cause of piping and storage tank failures. Oil lines or gas lines which are submerged under the ocean for long distances
How critical is MDMT in Vessel designing, Procurement and fabrication?
With several standards and guidelines governing the design process for an engineer, it becomes crucial for the design engineer to equate the client requirements along
Stress concentration factor, an important parameter for the safety of any component
During the design phase of an engineering component, it is critical to consider safety parameters that define the efficiency of the mechanism. Basic stress analysis
ASME Sec VIII the most common code used for designing pressure vessels in Oil & Gas.
We are all aware of the ASME Sec VIII, as an international Code for designing pressure vessels, but have we ever thought that despite the